GENERAL INFORMATION
eng 13
VIEWING DESCRIPTIVE TEXT
1. When a problem is detected, the "AL" alarm will flash on the
display and a pop‑up window displays the system where the
fault is located, the fault code, and what component is
identified as a problem.
a - System fault and
code
b - Component
2. Press the "+" button to view the descriptive warning text.
The identified component expands to show additional text
describing the fault.
a - System fault and
code
b - Additional text
describing the fault
MODE
Alarms
AL
35737
[EXIT]
[MORE]
a
b
[NEXT]
STBD Sys Fault 57
<Ignition>
!
MODE
Alarms
AL
35738
[EXIT]
[ACTION]
a
b
[NEXT]
STBD Sys Fault 57
<Ignition coil is not
working properly>
!
To Next Page
Loading...
