GENERAL INFORMATION
eng 19
•
"Alarms" displays information on the location, identifies,
and advises a corrective action to take for all warning
alarms. While in the "Alarms" category, press the "+" button
for more detailed descriptive text about the fault. Press the
"+" button again to review the recommended corrective
action to take. Press the "MODE" button to review the next
fault, or press the "–" button to exit the "Alarms" descriptive
text screen.
•
"Settings" allows the user to turn on and off screens, select
a type of measurement (knots, kilometers, miles), select a
screen color, adjust the contrast and brightness of the
screen, select a digital or analog clock display, adjust and
correct various different sensor parameters (tanks, trim,
tabs), activate a GPS interface with the gauge, give the
gauge a specific name (up to 14 characters), and reset the
gauge to the factory default settings.
To Next Page
Loading...
