Mercury MercMonitor - Page 47

SETTINGS
eng 41
14.Press the "–" button to choose the "Default Calibration"
method or press the "MODE" button to quit the calibration.
MODE
35882
[ DFLT ]
[ QUIT ]
Tanks
Tank 1 Type
[ ADD ]
Tank 1 Vol
Tank 1 Cal
Tank 2 Type
Tank 2 Vol
100.0 G
Not inst.
Fuel
Default Calibration or
Add Fuel Method
15.Press the "MODE" button to finish "(OK)" and exit the "Tank
1 Cal" option.
MODE
35884
[ OK ]
Tanks
Tank 1 Type
Tank 1 Vol
Tank 1 Cal
Tank 2 Type
Tank 2 Vol
100.0 G
Not inst.
Fuel
Calibration OK
NOTE: The following procedure is used for the "Add Fuel
Method" of calibration.