VELVET DRIVE 5000A DOWN ANGLE TRANSMISSION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 8B-21
Pressure Test
1. Remove transmission temperature switch and install a suitable pressure gauge.
73247
a
a-Main Line Pressure Tap - Remove Temperature Switch
2. With boat in water, start engine and run until normal operating temperature is reached.
3. Refer to “Operating Specifications” for test RPMs and respective pressure readings.
Transmission Repair
Mercury Marine does not stock or sell replacement parts for the down angle transmission.
Velvet Drive has a network of distributors throughout the world to service their product.
These distributors, in turn, have a dealer network to service the transmissions. Also, service
manuals (for each transmission) can be obtained from Velvet Drive.
For the location of your closest distributor or service literature contact:
Velvet Drive Transmissions
Division of Regal Beloit
Theodore Rice Boulevard
Industrial Park
New Bedford, MA 02745
Phone: (508) 995-2616
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General