2
D
MIE MODELS - HURTH TRANSMISSION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 2D-1
REMOVAL AND INSTALLATION
Section 2D - MIE Models - Hurth Transmission
Table of Contents
Torque Specifications 2D-2. . . . . . . . . . . . . . . . . .
Lubricants / Sealants / Adhesives 2D-2. . . . . . .
Preparation 2D-3. . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal 2D-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation 2D-4. . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Installation and Initial
Alignment 2D-4. . . . . . . . . . . . . . . . . . . . . . . .
Engine Final Alignment 2D-7. . . . . . . . . . . . . .
Engine Connections 2D-11. . . . . . . . . . . . . . . . . .
Seawater Hose Connection 2D-11. . . . . . . . .
Electrical Connections 2D-11. . . . . . . . . . . . . .
Fuel Supply Connections 2D-12. . . . . . . . . . .
Exhaust Hose Connection 2D-13. . . . . . . . . .
Throttle Cable Installation and
Adjustment 2D-13. . . . . . . . . . . . . . . . . . . . . .
Shift Cable Installation And Adjustment 2D-19.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General