EasyManuals Logo
Home>Mercury>Engine>MerCruiser MIE 8.2L MPI

Mercury MerCruiser MIE 8.2L MPI User Manual

Mercury MerCruiser MIE 8.2L MPI
1027 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
TROUBLESHOOTING
SERVICE MANUAL NUMBER 23
Page 1C-3
90-861326--1 MARCH 1999
CAUTION
DO NOT run engine above 1500 rpm, as suction created by seawater pickup pump
may collapse water supply hose and cause engine to overheat.
WARNING
Be sure that engine compartment is well ventilated and that no gasoline vapors are
present to prevent the possibility of a FIRE or EXPLOSION.
WARNING
DO NOT leave helm unattended while performing idle speed adjustment.
Used Spark Plug Analysis
Use the following illustrations for determining serviceability of spark plug. Spark plug
condition also can suggest a variety of possible engine malfunctions and, therefore, can
indicate needed engine repairs. When old plugs are replaced, replace entire set. Perform
plug service only on those plugs suitable for additional service, using the following
procedures:
1. Remove any oil deposits with solvent and dry plugs thoroughly.
2. Open electrode gap wide enough to permit cleaning and filing.
3. Remove combustion deposits from firing end of spark plug with a plug cleaner. Blow off
with compressed air to remove abrasives.
4. Reset gap to specifications by bending only side electrode with proper tool.
Downloaded from https://needmanual.com/!
IndexIndex

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury MerCruiser MIE 8.2L MPI and is the answer not in the manual?

Mercury MerCruiser MIE 8.2L MPI Specifications

General IconGeneral
BrandMercury
ModelMerCruiser MIE 8.2L MPI
CategoryEngine
LanguageEnglish

Related product manuals