MONITOR 1.01-1.02
1-13
MONITOR – VERSION 1.01-1.02
CAL 2 Calibration
Dual Station Setting
If you have 2 Monitors
connected to the same engine,
one can be set St1 and the other
should be St2.
Press the
button to save and move to the next function.
Paddle Wheel Speed
Sensor Frequency
Frequency can be changed to
match requirements of different
sensors. 4.9 is the frequency of
the paddle wheel speed sensor
provided by Mercury Marine.
Press the
button to save and move to the next function.
Water Pressure Sensor
Input
Select the speed input of the Pi-
tot water pressure sensor on the
engine.
NOTE:The standard speed in-
put on production Mercury Out-
boards is 100 PSI. On a High
Performance Outboard it could
be 200 Psi.
1. Press the
button to select.
1 = 100 PSI
2 = 200 PSI
2. Press the
button to move to the next function.
To Next Page
Loading...
