MONITOR 1.01-1.02
1-14
MONITOR – VERSION 1.01-1.02
CAL 2 Calibration
Fuel Tank Calibration
Select whether you want to cali-
brate the fuel tank.
NOTE: Selecting “1” will contin-
ue fuel tank calibration.
1. Press the
button to select 1= on, 0 = off.
Fuel Tank Calibration
0% Setting
Have the fuel tank level at
empty.
2. Press the
button to save. Press the button to ad-
vance to 25% setting.
25 Percent
Fuel to Add
Fuel Tank Calibration
25% Setting
Adding the amount of fuel shown
will raise fuel tank level to 25 per-
cent.
NOTE:The quantity of “Fuel to
Add” is determined by the fuel
tank capacity number entered in
CAL 1
3. Add the displayed amount of fuel to the fuel tank.
4. Press the
button to save. Press the button to ad-
vance to 50% setting.
To Next Page
Loading...
Need help?
General
