SMART TACH & SPEED
4-11
SMART TACH & SPEEDOMETER
12
10
9
11
13
14
16
15
0
1
2
3
4
5
6
7
Warning Display Screens
IMPORTANT: Refer to the Engine Operation, Maintenance
Manual for further explanation of the problem and the correct
action to take.
9. FAULT-IGNITION – A problem has developed in the ignition sys-
tem.
10. BATTERY – The electrical system is not charging or the battery
charge is low.
11. ENGINE DATA BUS – The data communication link between the
tachometer and engine is not connected.
12. FAULT-SENSOR – One of the sensors is not functioning correctly.
13. FAULT-WATER TEMP – The sensor for measuring outside lake/
sea water temperature is not functioning correctly.
14. UNIT MISMATCH – (Multi Engines) This message tells you that
the tachometers are not calibrated alike. For example, this could
happen if one tachometer reading is English and the other is in
Metric. Re-calibrate the tachometers.
15. LOW FUEL LEVEL – This message serves as a warning that the
fuel level in the fuel tank is critically low. You should stop for fuel
immediately to avoid running out.
16. LOW OIL LEVEL – OUTBOARD 2 STROKE ONLY – oil level in
the remote oil tank is low. You should stop and refill the oil tank im-
mediately to avoid running out.an
To Next Page
Loading...
Need help?
General
