Section 5 - Warning Alarms
90-8M0120668 eng MARCH 2016 Page 65
• The warning icon will replace the depth icon and the data field will remain red.
• If the operator does not have depth displayed as a constant data field in location #1, but it is active as a warning fault, then
the system status field will display a red field and show DEPTH.
• The operator can also show the depth warning as a user‑selected data area pop‑up in the Settings menu. Selecting the X
will minimize the depth alarm. The fault will still be displayed in one of two locations depending on the screen set‑up.
To Previous Page
Loading...
