Mercusys ac12 - Chapter 1. Introduction; 1.1 Product Overview

AC12
AC1200 Dual Band Wireless Router
- 2 -
Chapter 1. Introduction
1.1 Product Overview
The router integrates 4-port Switch, Firewall, NAT-Router and Wireless AP. Powered by 2x2
MIMO technology, the router delivers exceptional range and speed, which can fully meet the need
of Small Office/Home Office (SOHO) networks and the users demanding higher networking
performance.
1.2 Product Appearance
1.2.1 The Front Panel
The router’s LEDs are located on the front panel (View from left to right).
Name Status Indication
SYS
Off Power is off.
Flashing
The router is working properly.
2.4G
Off The 2.4GHz wireless band is disabled.
On The 2.4GHz wireless band is enabled.
Flashing The 2.4GHz wireless band is transmitting/receiving data.
5G
Off The 5GHz wireless band is disabled.
On
The 5GHz wireless band is enabled
Flashing
The 5GHz wireless band is transmitting/receiving data.
WAN
Off The WAN port is not connected.
On The WAN port is connected.
Flashing The WAN port is transmitting/receiving data.
4/3/2/1
Off The corresponding LAN port is not connected.
On
The corresponding LAN port is connected.
Flashing The corresponding LAN port is transmitting/receiving data.