07
Chapter 2 Use the Powerline Device
2.4 Add Another Powerline Adapter
If you have already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top oor, you can add a new
powerline extender to extend the wireless network.
1. Plug the new powerline extender into a wall outlet near one of the existing
powerline devices.
2. Wait for a minute, and check whether the LED turns on. If it’s on, skip to step 3. If
it’s not, continue with step 2 to pair the new powerline extender into the secured
powerline network.
a . Press the Pair button on one of the existing powerline devices for 1 second.
Its LED starts blinking green quickly.
b . Within 2 minutes, press the Pair button on the new powerline extender for 1
second. Its LED starts blinking green quickly as well. When the LED turns
solid green, the pairing process is complete.
3. Relocate the new extender to the Wi-Fi “dead” zone. Connect to the Wi-Fi using
the SSID and password on the product label.
a . Connect to the Wi-Fi using the SSID and password on the product label.
b . If you cannot nd the default SSID in your Wi-Fi network list, this may mean
the Wi-Fi Move feature has automatically copied over the existing wireless
settings. In this case, use the SSID and password of your existing powerline
network to connect.
Existing
Powerline Device
New
Powerline Extender
within 2 minutes
Blinking
Green
Quickly
Solid
Green
To Next Page
Loading...
