Mercusys MP510 - 3.11.5 Change Login Password

24
Chapter 3 Congure via Web Management Interface
3. Click BACK UP to save a copy of the current settings to your local computer. A
cong. bin le will be stored to your computer.
To restore conguration settings:
1. Connect to the powerline extender wirelessly. Visit http://mwlogin.net, and log in
with the password you set for the extender.
2. Go to Settings > Backup & Restore page.
3. Click BROWSE to locate the backup conguration le stored on your computer,
and click RESTORE. The conguration le is cong.bin.
4. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn o or reset the extender.
To reset the extender to factory default settings:
1. Connect to the powerline extender wirelessly. Visit http://mwlogin.net, and log in
with the password you set for the extender.
2. Go to Settings > Factory Default Restore page.
3. Click FACTORY RESTORE to reset the extender.
4. Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn o the extender.
2. We strongly recommend you back up the current conguration settings before resetting the extender.
3. 11. 5. Change Login Password
Go to Settings > Change Login Password, and you can change the login password
of the extender.