Mercusys MP510 - 3.2 Manage Powerline Network; 3.2.1 Add a New Device to the Powerline Network; 3.2.2 Change Powerline Network Name

10
Chapter 3 Congure via Web Management Interface
3.2 Manage Powerline Network
A powerline network is formed of powerline devices, including adapters and
extenders. Powerline devices in the same powerline network share the same
powerline network name.
3. 2. 1. Add a New Device to the Powerline Network
1. Connect to the powerline extender wirelessly. Visit http://mwlogin.net, and log in
with the password you set for the extender.
2. Go to the Status page and click the Powerline Network icon to open the
Powerline Device List.
3. Click the add icon and enter the Powerline Key of the device you want to add.
The Powerline Key contains 16 capital letters, formed like XXXX-XXXX-XXXX-
XXXX. It is printed on the back of the powerline device.
4. Click ADD to add the device.
3. 2. 2. Change Powerline Network Name
1. Connect to the powerline extender wirelessly. Visit http://mwlogin.net, and log in
with the password you set for the extender
2. Go to Basic > Powerline.