15
Chapter 3 Congure via Web Management Interface
3.6 LED Schedules
If you want to automatically turn o LEDs at times when you do not want light in the
room, please follow steps as below.
1. Connect to the powerline extender wirelessly. Visit http://mwlogin.net, and log in
with the password you set for the extender.
2. Go to Wireless > Device Settings > LED Control.
3. Enable LED Status to turn on the extender’s LEDs.
4. Enable LED Schedule.
5. Click Add to add an entry.
6. Choose LED O Time, and check the boxes from Sunday to Saturday you prefer.
Note: Please make sure that the system time is correct before using this function.
7. Click SAVE.
Done!
To Next Page
Loading...
