13
Chapter 3 Congure via Web Management Interface
Select Hide SSID, and your SSID will not be broadcasted. It won’t display when you
scan for local wireless network list on your wireless device and you need to manually
join the network.
Note:
Remember to write down the new SSID, for you will be disconnected when new settings are eective.
To customize more advanced settings:
Security: Select an option from the Security drop-down list. The extender provides
three options, No Security, WPA/WPA2 Personal (Recommended), and WEP. WPA2
uses the newest standard and the security level is the highest. Don’t change the
default settings unless necessary.
Version: You can select one of following versions.
• Auto (Recommended) - Select WPA-Personal or WPA2-Personal automatically
based on the wireless station’s capability and request.
• WPA-PSK - Pre-shared key of WPA.
Ecryption: You can select either Automatic(Recommended), TKIP or AES
Password: Set the password of the Wi-Fi network.
To Next Page
Loading...
