29
2 Safety information
3 Technical data
Risk of chemical burn
If the display shatters liquid may be released from it. Avoid direct
contact with the skin and inhalation of the escaping gases. In the
event of contact with bodily parts or clothing wash thoroughly with
soap and water.
Damage
Disconnect the touchpanel from the mains if you notice a smell or
smoke.
Cleaning
Do not spray liquids or cleaning agents directly onto the touchpan-
el. If during cleaning the touchpanel is penetrated by liquid or solid
materials, disconnect the touchpanel from the mains. Please then
get in touch with your KNX technician.
Operation
Do not use hard or pointed objects to operate the touchpanel. This
may damage the surface. A scratched surface may impair the op-
eration of the touchpanel.
Radiation
This is a class A device. The device may cause domestic radio in-
terference. In this case the operator may be required to take ap-
propriate measures.
Rated voltage: 230 V AC / 50 Hz
Power consumption: in operation: 9 W
in power saving mode: 2 W
Operating temperature: -5 °C to +45 °C
Screen: 7" colour TFT, 800x480 pixels,
65,000 colours
Hardware: 312 MHz Intel XScale PXA270
64 MByte FlashROM / 64 MByte SDRAM
Dimensions including frame:
208 x 148 mm
To Next Page
Loading...