32
6 Operation
The operating elements of the graphical user interface are the same as on
your PC. These allow you to
- tap in a listbox in order to open the full list and select an entry;
- tap check boxes, in order to select or deactivate an option;
- type in an input field, mark the value with a finger and using the overlaid
number pad enter a new value;
- tap on a button, in order to go to a page or to prompt an action;
- tap on a key, for controlling a load.
Presentation convention:
Buttons are shown in square brackets (e.g. tap on [SYSTEM]). Keys, list
entries, options, messages, screen names and so on, are shown between
single quotation marks (e.g. tap the 'Import slideshow' key; in the 'Display'
screen, etc.).
Navigation
The following buttons, amongst others, are provided to allow you to navi-
gate between the individual screen pages:
Standby
Invokes the Splash screen;
Invokes the 'Navigation splash screen', from where you can
invoke the special functions (⇒ chapter 7) and navigate to the
individual rooms of your home;
Scrolls back by one page;
If due to space limitations or for the sake of clarity not all the
operating elements can be shown at once, then these will be
spread over a number of screen pages;
Invokes the screen with the system functions (⇒ chapter 8).
If no operation takes place within a preset time, the touchpanel
switches to standby mode.
Tapping the screen surface returns the device to operational mode.
To Next Page
Loading...