Metaflex SDA-04DCB2 - Technical Specifications; SDA-04 with AC Motor; SDA-04 DCB2 with DC Motor

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00) Page 39 of 55
12 Technical specifications
12.1 SDA-04 with AC motor
Primary (supply) voltage : 195 - 253 Volt AC
Net frequency : 47 - 63 Hz
Power consumption : Min. 10VA, Max 1900 VA
Power : Max. 1800N (370W motor)
Fuse (fuse in AC mains inlet) : 2 x 6.3 Amp, slow, 5x20mm, IEC127
Ambient operating temperature in use : 0 to +50 degrees Celsius
Ambient operating temperature in storage : -25 to +60 degrees Celsius
Protection factor : IP 30
Humidity : 50…..95%, not condensed
Dimensions (WxHxD) : 336x123x65mm
Weight : 2.35 Kg
Output voltage : Maximum 260 Volt RMS, 0….100 Hz.
(regulated)
Power supply for accessories : 24Vdc, maximum 1 Amp.
Safety inputs 29 and 32 : Switch to + 24VDC or 0VDC (controller power
supply)
Input signals : Switch to 24VDC (controller power supply)
Output signals (relay) : Maximum 24 VAC/DC----500mA
Motors
90 Watt : WDH250wpx 90W
370Watt : WDH250wpx 370W
12.2 SDA-04DCB2 with DC motor
Power supply
Primary (supply) voltage : 100 - 240 VAC
Primary power : 1.4A
Net frequency : 47 - 63 Hz
Secondary (regulated) voltage : 24 VDC
Secondary (regulated) current : 2.5A
Power consumption : Min. 10VA, Max 50VA
Mains fuse : short-circuit proof, self-healing
Fuse (battery) : 20A
Control
Ambient operating temperature in use : 0 to + 50 °C
Ambient operating temperature in storage : -25 to +60 °C
Output voltage : Max. 24V (stabilised)
Power supply for accessories : 24VDC, (1A is available)
Output signals (relay) : Max. 24V @ 500mA
Protection factor : IP 30
Humidity : 50…..95%, not condensed
Dimensions (WxHxD) : 336x123x65mm (excl. batteries)
Weight : 0.75 kg (excl. batteries)