EasyManua.ls Logo

Metaflex SDA-04DCB2 - Advanced Network and Interlock Functionality

Default Icon
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00) Page 29 of 55
7.3.6 Advanced Network and Interlock functionality
Parameter 90 : (0) Door number
When a door is to be connected to the Metaflex door Server (MDS) via the
optional TCP/IP interface, the door must get a unique number that is set here.
0 = No door number is set
1..255 = The number of the door
Attention:
Each door must have a unique number; if more than one door has the same
number, this will lead to conflicts in the software.
Parameter 91 : (0) Interlock: Time
0 = Normal interlock configuration (no time limit)
1..5 = In order to prevent a build-up of persons in a interlock, it is possible to
automatically override the interlock operation after a set time (seconds)
(Lock input will be ignored)
Parameter 92 : (0) Interlock: Retain the command to "open"
If the interlock is active, retains the command "open" from the “next door waiting”.
0 = Memory function disabled
1 = Memory function enabled

Table of Contents

Related product manuals