EasyManua.ls Logo

Metaflex SDA-04DCB2 - Using the Instruction Manual; Definitions for (End) User;Operator;Technician; Explanation of Symbols; Compliance with European Directives

Default Icon
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00) Page 7 of 55
1.5 Using the instruction manual
Read these instructions carefully before installing the sliding door.
Retain these instructions so that you can consult them later if necessary.
These instructions are written for the door installer.
The user will use a separate instruction manual for use of the door.
1.6 Definitions for (end) user/operator/technician
(end) user : Anyone who makes use of the door.
Operator : A trusted user who is familiar with all safety aspects mentioned in this instruction
manual. The operator should not carry out any installation work activities unless
specifically tasked and authorised.
Technician : The technician is a Metaflex technician (or a technician that has
been provided with express written permission from
Metaflex) who is qualified to perform engineering
tasks on the door.
1.7 Explanation of symbols
STOP
To avoid personal injury, follow the safety regulations
implicitly
INFORMATION
Additional information is available
WARNING
It is essential that this instruction is carried out carefully
WARNING
Dangerous voltage
WARNING
Danger of entrapment
WARNING
Danger of crushing injuries to hands and/or fingers
1.8 Compliance with European directives
The installation is in accordance with the following EU directives:
2006/42/
EC
Directive on machinery
2014/30
EC
Directive on EMC (electromagnetic compatibility)
The CE mark is affixed to the heading style of the door.

Table of Contents

Related product manuals