Metaflex SDA-04DCB2 - Table of Contents

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00) Page 4 of 55
Contents
1 General 6
1.1 Introduction 6
1.2 Manufacturer/Distributor 6
1.3 Service/maintenance 6
1.4 Versions 6
1.5 Using the instruction manual 7
1.6 Definitions for (end) user/operator/technician 7
1.7 Explanation of symbols 7
1.8 Compliance with European directives 7
1.9 Commissioning and risk analysis 8
1.9.1 Commissioning 8
1.9.2 Risk analysis 8
2 Description of the SDA-04(DCB2) 8
2.1 Features of the SDA-04(DCB2) controller 8
2.1.1 Main Features 8
2.1.2 Specific features of the Metaflex controllers 8
3 Description of the door and its control 9
3.1 Basic rail components 9
3.2 Basic door components 9
3.3 Controller connection information 10
4. (Safety) regulations 11
4.1 Mechanical safety regulations 11
4.2 Electrical safety regulations 12
5. Installation, maintenance and dismantling 13
5.1 Installation 13
5.1.1 Assembly of the controller 13
5.1.2 Earth connection 13
5.1.3 Motor connection 13
5.1.4 Motor pulse generator 13
5.1.5 Connection sequence SDA-04 13
5.1.5 Configuration process 14
5.2 Dismantling 15
5.2.1 Decommissioning 15
5.2.2 Disassembly 15
6 Accessories and options 15
7. Configuration 17
7.1 Changing and/or reviewing parameters 17
7.1.1 Viewing a parameter. 17
7.1.2 Changing a parameter 17
7.1.3 Leaving the parameter menu 17
7.2 Parameter overview (end) user 18