Metaflex SDA-04DCB2 - Page 5

Installers manual 10.03.02-R03 (201058) EN SDA-04 (SW 5.xx) - SDA-04DCB2 (SW 22.00) Page 5 of 55
7.3 Installer parameter overview 20
7.3.1 Motor setup 20
7.3.2 Setting up safety devices 22
7.3.3 Speeds 23
7.3.4 Relay Settings 25
7.3.5 Input Configuration 27
7.3.6 Advanced Network and Interlock functionality 29
8 Parameter settings (short version) 30
8.1 Parameterlijst (eind) gebruikers 30
8.2 Parameterlijst installateurs 30
8.3 Conversion table parameters for installers 4.06 – 5.xx 33
9 Display codes and troubleshooting 34
10 Fault codes and possible solutions 35
11 Electrical connections 37
11.1 Input signals of the SDA-04 37
11.2 Priorities 38
12 Technical specifications 39
12.1 SDA-04 with AC motor 39
12.2 SDA-04DCB2 with DC motor 39
13 Software versions 40
14. Connection examples 41