Metallisation MK 73 - Recommended Spare Parts; Routine Maintenance Schedule

Page 28 of 64
4.1 Recommended Spares
The recommended spares for the MK73 Flamespray system are available as a complete
pack.
Part Number: GAS-SSP - MK61 / MK73 Standard Spares Pack for Gas Systems. This
comprises of the following parts:
4.2 Routine Maintenance
It is good practice to follow the below maintenance procedure, after every 8 hours of
use:
 Clean the outside of the pistol to remove adherent dust.
 Remove the air nipple and clean the inside cone, taking care not to scratch or
otherwise blemish the surface.
 Clean exposed surface of the wire nozzle carefully, again taking care not to scratch or
otherwise blemish the surface.
PART NO.
DESCRIPTION
QUANTITY
1007
‘O’ Ring
1
1008
‘O’ Ring
1
4517
Feed Roll Gasket
1
7579
‘O’ Ring
1
4541
‘O’ Ring
2
4518
Diaphragm (Large)
1
4519
Diaphragm (Small)
1
1027
Filter
2
1028
Gasket
1
1040/41
Valve Diaphragm (Gas/Oxygen)
2
1039
Valve Diaphragm (Air)
1
10073S
Mk73 Mixing Block ‘O’ Ring Set
1
1066
‘O’ Ring
2
1065
Cork Seal
2
1025
Fibre Washer
1
1024
Flexible Spacing Washer
1
4550
‘O’ Ring
1
4538
‘O’ Ring
1