14
95-2009 DASH DISASSEMBLY
1
Pull down on the panel and remove
the 9/32" hex-head screws exposed
on the bottom of the dash trim bezel.
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
Remove (2) 9/32" hex-head screws
from the knee bolster panel.
2
Remove (1) Phillips screw above the
instrument cluster.
4
Unclip the dash trim bezel and
remove.
5
Remove (2) 9/32" hex-head screws
securing the factory head unit and
disconnect the wiring.
6
CHEVROLET • BLAZER 2002-2005
S-10 2002-2004 (WITH DOUBLE DIN RADIO)
GMC • SONOMA 2002-2004
OLDSMOBILE • BRAVADA 1998-2001
Continue to kit assembly.
To Next Page
Loading...
