19
95-2009 DASH DISASSEMBLY
1
Remove (2) Phillips screws under the
instrument cluster.
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
Unclip each side of the dash trim
bezel (fuse access) and remove (1)
Phillips screw exposed on each side.
2
Unclip the trim panel above the
pedals. (It is not necessary to remove
the panel it can be left hanging).
4
Remove (2) Phillips screws from the
knee panel.
5
Unclip the knee panel and remove (1)
phillips screw exposed on the right
side of the steering column.
6
Unclip and remove the entire dash
trim bezel.
7
CHEVROLET • IMPALA 2000-2005
Continue to kit assembly.
To Next Page
Loading...
