Description of the instruments
100,000 cts digital multimeters 13
Description of the instruments (continued)
The keypad has the following function keys:
The keys are taken into account and applied when pressed. If the key press is
validated, the instrument beeps.
The active keys on a long press are identified by "…":
Meas…, Mem… , Setup…
Selection of the function
parameter
Selection of the function
parameter
Selection of the function
parameter
Selection of the function
parameter
Hold of the display
Selection of RUN or HOLD
Measurement menu on 2
levels, 1/2 or 2/2
Reset for SURV/PEAK/REL and
CNT
Start of an acquisition; second
press, stop recording
Management and configuration of
records
Selection of the configuration
menus
www.ShopAEMC.ca
Shop for AEMC products online at:
1.800.561.8187
To Next Page
Loading...
