General directions
100,000 cts digital multimeters 7
General directions (continued)
The multimeter can communicate with a PC, making it possible:
- to update the embedded software Connect the multimeter to the PC via
the USB link and run the application downloaded from CHAUVIN ARNOUX's
web site.
- to calibrate the multimeter using the optional SX-MTX 329X calibration
software (HX0059B).
- to program using Labview and Labwindows
- to recover the data or program the device using the SX-DMM software
Your multimeter includes:
- an isolated optical USB link (type HX0056Z)
- SX-DMM processing software
- Labview and Labwindows drivers to program the devices.
It is also possible to program using the SCPI or MODBUS protocol.
To Next Page
Loading...
