Bluetooth module
100,000 cts digital multimeters 45
Bluetooth Module
Bluetooth
(on -BT version)
The -BT version multimeters are equipped with a Bluetooth module.
They incorporate the Serial Port Profile service, making it possible to
communicate with a computer equipped with any type of Bluetooth adapter.
If your computer does not have a Bluetooth module, the USB/Bluetooth adapter
for PC (ref. P0 1102112) will be necessary.
For the installation of these drivers, refer to the data sheet that comes with them.
Virtual RS232 serial communication between the multimeter (Server) and the PC
(Client) requires the creation of a connection at the PC end.
No configuration is necessary at the multimeter end, other than activation of
Bluetooth communication (BT) using the Comm. function in the "Util" menu.
To activate connection with the multimeter, the Bluetooth identification code is:
"0000".
(for first-time
connection only)
Switch the multimeter on.
Configure it for Bluetooth (BT) in the setup menu.
Create a new connection with the software driving your Bluetooth
module at the PC end by:
clicking the Bluetooth Manager icon of the menu bar at the bottom
of the screen
selecting the "Add a peripheral" function
selecting the Bluetooth peripheral of the multimeter, then clicking
Next
clicking Next after configuring a COM port number x
You can verify that the connection has in fact been created by viewing the icon
associated with the multimeter in the window.
For more information, refer to the Help menu that comes with the Bluetooth
utility.
Example of
creation of com4
www.ShopAEMC.ca
Shop for AEMC products online at:
1.800.561.8187
To Next Page
Loading...
