Functional description
100,000 cts digital multimeters 25
2. Description of the “Keypad” keys (continued)
The MEM mode records the content of the
digital display(s) in the memory of the device
at a pre-programmed rate.
A short press on starts a recording
series.
The MEM symbol is displayed in yellow
during the whole recording period; it is
accompanied by the number of records
made.
Another short press on stops the
storage of the measurements.
The number of values to be stored for a
measurement campaign can be
programmed: recording then stops
automatically when t his number is reached.
The records and the configuration can be
looked up by a long press on
Another press on recalls a series
of records.
In this stage, it is possible to list the files
and to configure the maximum number of
records according to the version and the
recording frequency or interval (1s is
default).
Select the Files menu in the MEM
function to display the list of successive
records.
Each record is identified by its date and
its start time.
To Next Page
Loading...
