EasyManua.ls Logo

Metrix MTX 3292 - General Characteristics; Environmental Conditions; Power Supply; Safety, CEM

Metrix MTX 3292
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General, mechanical characteristics
60 100,000 cts digital multimeters
General characteristics
Environmental
conditions
Altitude <2000m
Reference range 23°C ±5°C
Specified range of use 0°C to 40°C
Influence of temperature see §. Variation.
Relative humidity 0% to 80% from 0°C to 35°C
0% to 70% from 35°C to 40°C
limited to 70% for the 5 and 50Ω ranges
Dust- and water-tightness IP67 (in the event of immersion, under 1m of
water for 30 mn, it is necessary to let the
water flow off or to let the unit dry before
putting it back into service).
Storage range -20°C to 70°C
Power supply
(3 possibilities)
Mains supply by 230V charger (±10%) /45Hz to 65Hz
Voltage fluctuation between 207V and 253V
There is a specific charger for the American market: 110V/60Hz.
Primary batteries: 4x1.5V nominal, LR6 Alkaline (or more if possible)
Life: ≈100 h in VDC (ultra power)
Storage batteries: 4x1.2V A-A storage batteries, NI-MH LSD 2400 Life: ≈80h
(2400mAh). In order to optimize the life of the storage batteries, the charging
of the multimeter with the charger is operational up to <35°C.
Display
1 colour graphic LCD display unit, 320x240 pts, allowing the display of one
main quantity and 3 secondary quantities or a graphic screen
Dimensions of the display: 70x52mm useful
The refresh rate of the display unit is 200ms.
Security
According to NF EN 61010-1:
Insulation class 2
Degree of pollution 2
Use indoor
Altitude < 2000 m
Measurement category
of the "measurement" inputs CAT III, 1000V with respect to earth
Measurement category
of the "measurement" inputs CAT IV, 600V with respect to earth
CEM
This instrument is designed in conformity with the EMC standards in force and
its compatibility has been tested in accordance with the following standards:
Emissions (cl. A) and Immunity NF EN 61326-1
Mechanical characteristics
Housing
Dimensions 196 x 90 x 47.1mm
Mass 570g
Materials ABS V0
Dust- and water-tightness IP67, according to NF EN 60529
www.ShopAEMC.ca
Shop for AEMC products online at:
1.800.561.8187

Related product manuals