EasyManua.ls Logo

Metrix MTX 3292 - Functional Description; Description of the SETUP Menu

Metrix MTX 3292
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functional description
100,000 cts digital multimeters 15
Functional description
1. Description of the "SETUP" menu
The SETUP menu configures the parameters of the multimeter according to the
conditions of use and user's preferences.
This menu proposes the main adjustments or the configuration of the multimeter on 3
levels. The configurations are kept in memory when the multimeter is switched off, if
the USER mode (USR) is active. Otherwise, the instrument starts up with the PLANT
configuration. The menu that is not available is shaded.
Level 1
SETUP menu (1/3)
General
configuration
of the multimeter
UTIL: utility for adjusting the lighting, the
standby mode, the audible beep of the
keys, the language, and the internal clock
on 2 configuration levels.
Comm: for communication and
adjustments of the IR/BT type, then the
IR rate in baud, and the protocol,
MODBUS or SCPI.
Power supply: characterization of the
internal power supply of the device or type
of battery, Ni-MH or Alkaline primary
battery, and capacity.
SETUP menu (2/3)
Configuration of the
measurements
Measure: configures the filter, the
impedance, the reference in dBm and in
power W.
Clamp: configures the type of input, current
or voltage, the ratio indicated on the clamp,
and the unit (default is A).
Math: configures the type of measurement
assigned to the mathematical channel and
the values and unit of A and B of the
function Ax+B.
SETUP menu (3/3)
Configuration and
personalization
Memory: reminder of the files, of the
number of records (1000 is default and
6500 max for the MTX 3293), and of the
interval between records (1s is default; up
to 23:59:59). See §. Storage.
Config: choice of recall of the PLANT
configuration or of the User (USR) or Basic
(default value) start-up mode.
See §. Default configuration.
About: indicates the traceability of the
multimeter: serial no., software and
hardware versions.
www.ShopAEMC.ca
Shop for AEMC products online at:
1.800.561.8187

Related product manuals