METRON QA-90

3-7
F1 F2 F3 F4
List all sequences in memory ..........> F7
Print all sequences in memory .........> F6
F5
MORE GO BACK MAIN MENU
F1 F2 F3 F4
Sequence name : ...> F7
Delete sequence in memory .............> F6
Delete all sequences in memory ........> F5
GO BACK MAIN MENU
F1 F2 F3 F4
5. SETUP (F3)
This function is used for entering general information in connec-
tion with the test. Seven main displays are shown below.
SYSTEM SETUP F7
Operator : ...> F6
Establishment : ...> F5
MORE STORE CAL. MAIN MENU
F1 F2 F3 F4
QA-90 Serial no : XXXXX .> F7
IT-Net : N ..........> F6
Power-up delay time : 2 Seconds.> F5
MORE GO BACK CAL. MAIN MENU
F1 F2 F3 F4
QA-90 Serial no : XXXXX .> F7
IT-Net : N ..........> F6
Power-up delay time : 2 Seconds.> F5
MORE GO BACK CAL. MAIN MENU