MHM Synchroprint X-Type plus - Blocked Operation

Operating Instruction X-Type plus
Operating instructions X-Type plus V1-3.docx Page 40 of 45
9.5. Blocked operation
In several working positions operation will be blocked automatically. The reason for blocking will
be displayed by a symbol or pressed buttons on the tablet. To operate the machine again the
blocking reason must be eliminated.
The following reasons block machine operation:
Label
Symbol or button
Description / trouble-shooting
Tablet not
connected.
The tablet is not connected to machine
control.
Palletchange
+
Palletchange function is active.
Clean
Turntable is on clean position.
Unlock table
+
Turntable is unlocked and turns free.
Reference drive is necessary.
Unlock screens
Screens are unlocked.
Blocking reason