MHM Synchroprint X-Type plus - 11 Terms of the Guarantee; 12 Limitation of Liability; 13 Support, Customer Service and Hotline

Operating Instruction X-Type plus
Operating instructions X-Type plus V1-3.docx Page 45 of 45
11. Terms of the Guarantee
The terms of the guarantee are detailed in the General Terms and Conditions of Machines Highest
Mechatronic GmbH.
12. Limitation of liability
Warranty and liability claims for personal injury and material damage are excluded if they can be
attributed to or are a result of one or several of the following:
 Improper use of the Synchroprint.
 Incorrect assembly, operation or maintenance of the Synchroprint by the operator.
 Operation of the machine with defective safety devices and/or safety devices which are
missing / removed or not in correct working order.
 Failure to comply with the safety instructions in this document with regard to transportation,
assembly, start-up, installation, operation, control and maintenance of the Synchroprint.
 Failure to comply with the Operating Instructions.
 Unauthorized modifications to the Synchroprint (e.g. disassembly of original MHM
components and/or use of any non-original MHM components)
 Unauthorized modifications to any part of the drive or control systems (e.g. change of
control components or frequency converters).
 Lack of monitoring and maintenance of machine parts/components subject to wear and tear.
 Repair measures, maintenance or service work carried out by unauthorized persons.
 Use of lubricants other than those recommended by MHM.
 Operation of the machine under technical conditions other than those specified by MHM
(e.g. excessive power supply voltage and/or excessive air pressure).
 Damage by any foreign object and/or force majeure.
 Omission of specified maintenance, service measures and procedures.
 Operation of the Synchroprint by untrained personnel.
13. Support, Customer Service and Hotline
In case of any problems or additional questions please turn to your appropriate service partner.