MHM Synchroprint X-Type plus - Additional Equipment and Danger Zones; Flash Cure Units and Flocking Devices; Danger Zones Identification

Operating Instruction X-Type plus
Operating instructions X-Type plus V1-3.docx Page 7 of 45
1.4. Required qualification for operations
Skill
Assistant
Operating
personnel
Maintenance
personnel
Service
personnel
Colour refill (only at standstill)
x
x
x
x
Unloading substrates
x
x
x
x
Cleaning of the machine (only at standstill)
x
x
x
x
Setting screens
x**
x
x
x
Equip flood and print squeegees
x**
x
x
x
Equip the screens
x**
x
x
x
Adjust squeegees
x**
x
x
x
Clean of the screens in clean mode
x**
x
x
x
Equip machine with dryer or changing the position
x**
x
x
x
Applying substrates
x
x
x
Enable and disable printing heads
x
x
x
Enable and disable of dryer
x
x
x
Start of all printing processes and adjustment work
x
x
x
Activities at the maintenance unit
x
x
x
Lubricate of the machine
x
x
x
Shutting down the machine
x
x
x
Long-term shutdown
x
x
Permanent shutdown of the machine
x
x
Maintenance and repairs at the pneumatically system
x*
x
Maintenance and repairs at the electrical system
x*
x
Maintenance and repairs at the mechanical system
x*
x
Maintenance and repairs at additional units
x*
x
Maintenance and repairs at the electronically system
x
Maintenance and repairs at the safety system
x
* only with the required qualification
** only together with the operating personnel