Micromeritics GEOPYC 1365 - Page 46

4 SOP (Standard Operating Procedures)
Field or Button
Description
Input reference volume
[button]
Enter. Tap to enter the input reference volume manually.
Calculate. Tap to allow the system to calculate the input
reference volume.
Reference mass. Enter the sample reference mass.
Absolute density. The density computed after excluding
from the volume that of the pores and cavities.
Porosity. Enter the sample porosity.
Measurement cycle count
[scrollselection]
Enter the number of measurement cycles to be run.
Method [textbox]
Method used to run the analysis.
Name [textbox]
Name of the procedure.
Operator [textbox]
Person running the analysis.
Porosity [textbox]
Displays when Calculate is selected.
Preparation cycle count
[scrollselection]
Enter the number of preparation cycles to be run. It is recom-
mended that at least two preparation cycles and five sub-
sequent cycles be performed on each sample.
Run blank [checkbox]
Select to run an analysis with no sample.
Sample mass [scrollselection]
Enter the sample.
Submitter [textbox]
Person requesting the analysis.
Update [button]
Saves the entered information and closes the window.
SOP Fields and Buttons Table (continued)
4 - 4
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016