MicroNet CE-507 - Page 14

Introduction
CE-500 Platform Optional Modules
GDUTUG500/01
CE-500 MDT Hardware Guide
14 / 97
Basic configuration features
Details
Keypad
Rubber tactile, multi-level backlight
Internal speakers
- Stereo, 2 X 1W, 90 dB nominal @ 0.1m
- Multi-level volume control
Internal microphone
- High sensitive
- Noise filtered
Light sensor
Configurable for device backlight adjustment
Communication Interfaces
Rs232 ports
- 1 X 4 Wire (TX, RX, RTS, CTS)
- 1 X 2 Wire (TX, RX)
- 300 - 115200 bps
USB OTG port
USB 2.0 - low, full and high speeds
USB Host port
USB 2.0 - low, full and high speeds
Peripherals Control
Digital I/O
- 2 X automotive inputs
- 1 X open collector output
Analog Input
0V – 30V
1-Wire Interface
Dallas ID memory button support
Power
Input power
- 5V DC power input by device side panel connector
- Direct vehicle battery connection (12V / 24V) by cradle or
accessory cable
- SAE J1455 compliant
Mechanical
Vibration
5 - 1000 Hz, ~4g, 3 axis
Mechanical Shock
- Operational (40g, 11ms, 3 axes)
- Crush safety (75g, 6ms, 3 axes)
Drop
According MIL standard
Device Mounting
- RAM® Mounts compatible mounting arm
- Micronet mounting arm available (optional)
- Device cradle available (optional)
Environmental
Temperature range
- Operating: -4 °F to +158 °F (-20 °C to +70 °C)
- Storage: -22 °F to +176 °F (-30 °C to +80 °C)
- Operating with internal battery option: 14 °F to 140 °F (-10 °C to
+60 °C)
Humidity
0 to 95%, non-condensing
IP
IP54
RoHS
Complaint
Certifications
Standard compliance
FCC, CE, E-Mark