MICROPOINT qLabs ElectroMeter Q-1 - English

1
EN
Table of Contents
1. Introduction ....................................................................................3
1.1 Before You Start
1.2 Intended Use
1.3 Test Principle
1.4 Packaging
2. Accessory List
...............................................................................4
3. Product Overview
.......................................................................... 4
4. Operation Summary
......................................................................6
5. Before Testing
................................................................................6
6. Precautions, Limitations and Warnings
...................................... 7
6.1 Care of Your qLabs
®
ElectroMeter
6.2 Patient Health Status
6.3 Performing a Test
6.4 Collecting a Fingerstick Blood Sample
6.5 Electromagnetic Compatibility
7. Powering the qLabs
®
ElectroMeter ON and OFF .......................9
7.1 Power Connection
7.2 Powering the qLabs
®
ElectroMeter On
7.3 Powering the qLabs
®
ElectroMeter Off
8. qLabs
®
ElectroMeter Settings .................................................... 11
8.1 Enter Setup Mode
8.2 Setting the date
8.3 Setting the Time
8.4 Entering Patient ID
8.5 Bluetooth Settings
8.6 Lot Number Setup
8.7 Setting a Target Range For Your INR Results
8.8 Selecting Displayed Units
8.9 Backlight Setting
8.10 Selecting Language
9. PT Test
.........................................................................................16
9.1 Entering Test Mode
9.2 Insert a Test Strip