MICROPOINT qLabs ElectroMeter Q-1 - Finishing the Test Procedure

• Unexpected Results:
When the qLabs
®
ElectroMeter displays a PT-INR result outside of the
expected therapeutic range, it may or may not be due to an unusual
clinical situation.
What to do:
When you encounter an unexpected result, please repeat the test
with a fresh qLabs
®
PT-INR test strip. If the same result is obtained,
immediately consult with your medical professional.
For self-testing users, contact your health care provider if
you have questions about your test results and any actions
you should take.
NOTE:
• Please read the qLabs
®
PT-INR Test Strips Package Insert for more
detail on the above content.
9.9 Finishing the Test
Remove and discard the used test strip into a sharps or other puncture
proof container. It is recommended to power off the qLabs
®
ElectroMeter
when it is not in use.
11.6 PT 0.8 INR
8.2 QC
Before turning off the meter, press the “ ”
button to return to the test mode.
SET MEM
OFF
VER
Remove the test strip.
NOTE:
• If performing another test with a fresh test strip, please use a
different nger for the new test.
21
EN