MICROPOINT qLabs ElectroMeter Q-1 - Results and Explanation

If the test results need to be reported
instantly, press “
” button to print or
upload the results.
When the “
” button is pressed, the
qLabs
®
ElectroMeter will prompt the user to
remove the test strip.
NOTES:
• Test results are automatically stored in the qLabs
®
ElectroMeter
memory including all the information of the test (See Section 10 for
reviewing past results).
• The qLabs
®
ElectroMeter memory can store up to 200 test results.
If the memory is full, the new test result will overwrite the oldest test
result.
9.8 Results and Explanation
• Normal Range:
Results for normal blood were determined by testing 120 subjects
who were not taking anticoagulant medication. The ranges found
were INR: 0.7-1.4.
• Therapeutic Range:
Therapeutic ranges are determined for each patient individually by
their health care professional. While most recommendations are within
an INR range of 2 to 4.5, values outside the indicated range may be
encountered.
• Re-establish Therapeutic Target Range:
There could be a bias from one test system to another. You must re-
establish the INR therapeutic target range at the initial use of qLabs
®
system. This range may be different from your previous therapeutic
target range.
20
EN
SET MEM
OFF
VER
CODE: 1505320
LOT: 3052E0503
01/05/2014 14:30