Microscan HAWK MV-4000 - Page 36

Chapter 2 System Components
2-22 HAWK MV-4000 Smart Camera Guide
As a precaution, the output signals are individually fuse-protected up to 50 mA. HAWK
MV-4000 uses resettable fuses. The fuses protect HAWK MV-4000 if you accidentally
connect their corresponding output signal to a device that sources/sinks more current than
HAWK MV-4000 can safely transmit. If more than 50 mA of current goes through your
HAWK MV-4000, the fuse will eventually trip. After disconnecting your HAWK MV-4000,
the fuse will reset only after it has sufficiently cooled.
The diagram below depicts HAWK MV-4000’s onboard fuse.
(Equivalent circuit only.)