Microscan HAWK MV-4000 - Appendix E: CloudLink Web HMI

HAWK MV-4000 Smart Camera Guide E-1
E
CloudLink Web HMI
E
APPENDIX E CloudLink Web HMI
CloudLink allows you to visualize Microscan Link values and images
from compatible Microscan smart cameras and vision systems. It runs in
your web browser, and is compatible with a wide variety of modern
browsers including those found on tablets and smart phones.
This appendix contains information about CloudLink support for the
HAWK MV-4000. Refer to Getting Started with CloudLink – installed in the
documentation folder C:\Microscan\Vscape\Documentation during
AutoVISION/Visionscape installation – for detailed information about
configuring and using the CloudLink web HMI.
CloudLink supports Windows 7 (32-bit and 64-bit) and Windows 10.
CloudLink requires an HTML5-compatible browser:
• Internet Explorer 11 or later
• Google Chrome
• Firefox
• Mobile Safari (iPhone / iPad)
• Mobile Chrome on Android devices
The following browsers were explicitly tested for compatibility:
• Internet Explorer 11.0.2
• Google Chrome 33.0
• Firefox 28.0
Additional Notes:
• Safari for Windows is not supported.
• Internet Explorer 11 or later and Google Chrome 33 or later are
recommended for extended CloudLink sessions.