Appendix C General Specifications
C-8 HAWK MV-4000 Smart Camera Guide
HAWK MV-4000 Connectors
The HAWK MV-4000 has several interface connectors. These are the digital I/O and power
connector, 100/1000 Base-T connector, the VGA/USB connector, and the liquid lens connector.
Digital I/O and Power Adapter Cable Connector
The digital I/O and power connector of the adapter cable is an M12 12-pin plug connector
that transmits and receives digital I/O signals, provides an analog reference voltage for an
inline control system lighting controller, and provides power to your HAWK MV-4000.
To Next Page
Loading...
