Microscan HAWK MV-4000 - Page 89

HAWK MV-4000 General Specifications
General
Specifications
C
HAWK MV-4000 Smart Camera Guide C-9
The pinout for the digital I/O and power connector adapter cable is as follows:
To interface with this adapter cable connector, you can use either a Microscan accessory
cable or you can build your own. To build your own digital I/O and power cable, parts can
be purchased from:
Pin Signal Name
1 Output Common
2 Analog Output
3 Output 3
4 Power
5 Trigger
6 Input Common
7 Input 2
8 Input 3
9 Input 1
10 Output 1
11 Ground
12 Output 2
Cable Information
Manufacturer Phoenix Contact GmbH and Co. KG
Part Number SAC-12P- MS/3.0-PVC SC0 Order No: 1554788
Description Sensor/Actuator Cable, 12-Pos., Black PVC, Straight M12 SPEEDCON Plug on Free Conductor End, 3.0 m