Microscan HAWK MV-4000 - Page 7

vii HAWK MV-4000 Smart Camera Guide
APPENDIX A Selecting a Lens A-1
Lens Selection A-2
Lens Specifications A-4
APPENDIX B Cable Specifications B-1
61-9000132-01 Cable, Adapter, HAWK MV-4000 to QX-1 B-2
61-9000134-0X Cable, Ethernet, X-Code/RJ45 CAT 6A, 1 m, 3 m, 5 m B-3
M12 to Smart Series and Camera Cables B-4
97-000012-01 Power Supply, M12 12-Pin Socket, 1.3 m B-5
99-000020-02 Trigger, M12 4-Pin Plug, NPN, Dark On, 2 m B-6
APPENDIX C General Specifications C-1
Sensor Board C-2
CPU Board C-3
VGA/USB Port C-4
Electrical Specifications C-5
Environmental Specifications C-6
Dimensions C-7
Digital I/O and Power Adapter Cable Connector C-8
100/1000 Base-T Connector C-10
VGA/USB Connector C-11
Liquid Lens Connector C-13
APPENDIX D MVMonitor Web Page D-1
Using the MVMonitor Web Page D-2
APPENDIX E CloudLink Web HMI E-1
Connecting E-2
Application Overview E-3
Application Bar E-4
Pages, Panels, and Widgets E-5
APPENDIX F Serial Commands F-1
APPENDIX G Operating System Save and Restore G-1
Restore to Microscan Factory Settings G-2
Access Microscan Rescue Utility G-7
Back Up/Restore/Capture the OS Image with Microscan Rescue Utility G-11
APPENDIX H OS Config Application H-1
Global Settings Tab H-2
Write Filter Tab H-3
Capture OS Tab H-4
Languages Tab H-5
eMMC Tab H-6
EULA Tab H-7