Microtest 6375 - Page 61

6–23
MEASUREMENT MODE
:MEAS:LIMIT <disc>
Set percentage or absolute scale limits.
Parameters:
The following discrete parameters are
valid:
ABS Absolute limits.
PERC Percentage limits.
Example: :MEAS:LIMIT PERC
will select percentage limits.
Response:
None.
:MEAS:LIMIT?
Limit type query.
Parameters:
None.
Response:
Returns the scale bar limits according
to this table:
0 Absolute scale.
1 Percentage scale.
Example: 0
indicates that the scale bar currently
has absolute limits.
:MEAS:HIgh-LIMit <real>
Set scale high limit.
Parameters:
The required high limit. No unit should
be supplied: the nominal unit is used.
Example: :MEAS:HI-LIM 5.0
will set a high limit of +5.0% of
nominal.
Response:
None.
:MEAS:HIgh-LIMit?
Returns the current scale bar percentage
high limit.
Parameters:
None.
Response:
The current high limit in engineering
format.
Example: +.25000000E+01
indicating a high limit of +2.5% of
nominal.