Midtronics GR8-1200 OEM - Chapter 3: Getting Started; Logging in for the First Time; Bootup; Selecting a Language

GR8-1200 OEM
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
19
The instructions in this section will help you quickly put your
GR8 to work.
Logging In for the First Time
Bootup
When you turn on the GR8, it will initially show the GR8-1200
logo. Screen may take up to ten seconds to boot up while
testing the internal software integrity.
Selecting A Language
After the logo appears, the  rst selection screen to appear
enables you to temporarily set the language for the display
and printed test results.
Use the UP or DOWN ARROW, or press the corresponding
numerical key to move the dot to the option button of your
choice.
1 ENGLISH
2 ESPAÑOL
3 FRANÇAIS
Press the NEXT soft key to continue.
User ID
This function enables you to select the user name of the
person performing the tests. Up to 50 user names can be
created and stored.
1. ADD USER
2. JOHN
2. JOHN
3. TOM
Press the NEXT soft key to begin testing.
NOTE: The BACK option is only available when
the charger is used for the  rst time.
Adding a User
1. Use the DOWN ARROW key to scroll to ADD USER. Press
the NEXT soft key to continue.
0 UNREG
1 ADD USER
2. Use the UP or DOWN ARROW key to scroll to the ID place-
holder you want to use. Scrolling past the  rst line displays
the previous screen. Scrolling past the fourth line displays
the next screen. To display more placeholders, continue
scrolling or use the LEFT or RIGHT ARROW key to jump
up or down through the list  ve lines at a time. Press the
NEXT soft key to continue.
1 USER01
2 USER02
3 USER03
4 USER04
3. To clear the default characters, press the LEFT ARROW
key. To add a space, move the cursor forward by pressing
the RIGHT ARROW key.
ENTER USER ID
USER01
4. Display a character by pressing UP or DOWN ARROW key
as many times as needed. Press the SAVE soft key.
ENTER USER ID
WILL S
Chapter 3: Getting Started
Chapter 3: Getting Started
Do not connect both sets of clamps to the
same battery at the same time.
Connecting both sets of clamps to the same bat-
tery at the same time may damage the GR8.