BLITZ
KIT
FOUR
TROUBLESHOOTING
This game uses complex electronic components that are very SENSITIVE to static electricity.
The following precautions must be observed and followed prior to handling any of the gam*
electronics.
I. Ensure that the A.C. power to the game is turned OFF prior to servicing the electronics.
2.
Discharge any static electricity build up in your body by touching the safety ground
et,,
of the power supply chassis while the line cord is connected to a properly grounded
oeti!
This is to be done BEFORE touching or handling the electronic assemblies.
3.
Store the electronic assemblies in an anti-static area. Anti-static bags are to be
use
store or transport the game CPU Board Assembly.
4. DO NOT remove or connect any electronic assemblies when the cabinet power
i5
Doing so will damage the electronic assemblies and void the warranty.
5.
Always replace ground wires, shields, safety covers, etc. when maintenance or servki?
ir
completed. Ensure that all ground and mounting screws are installed and tightened
if,
4-l
To Next Page
Loading...
