What if... Possible fault Solution
The wash result is
unacceptable.
The baskets and inserts
were incorrectly loaded or
overcrowded.
Properly arrange the
glassware.
Do not overload baskets
and inserts.
The program used was not
suited to the type/amount
of soiling.
Select an appropriate
program or modify the
program.
The detergent used was
not suited to the
type/amount of soiling.
Use a suitable detergent
for machine washing.
The labware was left soiled
for too long.
Do not leave soiled
labware unwashed for
more than 6 hours.
A spray arm is blocked. Arrange the items do not
block the spray arms.
Jets are blocked in the
spray arms or inserts.
Check the spray jets and
clean as needed.
The basket or insert is not
properly connected to the
water supply.
Use the adapter to
properly connect the water
supply to the basket or
insert.
Frequently asked questions
64
To Next Page
Loading...
